Terminal Setup


This section is focused on terminal's setup and all of its available features.

It's important to bear in mind about the settings shown on the examples of the following suc sections:

  • I. In some cases, they are dependent on the Acquirer initially selected for your terminal.
  • II. Some of the them are also limited by settings defined in the terminal's merchant settings - Allow PayFAC property is an example, once is configured in Merchant's Partner Portoflio, and affects one of the terminal feature settings.
  • III. Some of them will appear depending on previously selected ones.

If you need more information, contact our Support Team.

General Setup

Bank Settings

Filter:

FIELD DESCRIPTION
Terminal Number Unique identifier of your terminal, autogenerated on creation and not editable
Terminal Bank/ Acquirer Merchant Bank/ Acquirer selected on initial setup
Shared Secret String used to create a digital signature - should contain alphanumeric characters
Currency Transaction currency allowed for terminal and selected on initial setup
Allow Multicurrency Allows the use of multicurrency procesing by the terminal
Allow EMCP Allows enhanced multicurrency processingfor transactions - for more details refer to Feature Information - EMCP
Allow eDCC Allows eletronic dynamic currency conversion (available for MOTO and e-commerce terminals and only supported by Elavon bank)
Allow MOTO Allows MO/TO (Mail Order/Telephone Order) transactions
Allow Internet Allows internet transactions - essential for e-commerce and integrations
Allow CHP Allows card holder present transactions - essential for transactions where the card data is read by card device readers
Allow Recurring Override Allows automatically marking of transactions as recurring based on the transaction type informed, even if the transaction doesn't specify a recurring reference
Bank Merchant ID (MID) Acquirer's Merchant ID
Bank Terminal ID (TID) Acquirer's Terminal ID
Enable Automatic Settle Set transactions to be settled automatically
Batch Time Time of daily automatic settlement
Force Unique Order Id Forces unicity in order ids within the terminal



Terminal Location & Phone

Filter:

FIELD DESCRIPTION
Name Terminal's name
Merchant Local Phone Num Merchant local phone number for the terminal
Postal Code Location of the terminal - postal code
City Location of the terminal - city
Terminal Country Location of the terminal - country
Time Zone Location of the terminal - timezone
Sub Merchant ID ID to identify the submerchant using the terminal of a Pay Facilitator (PayFAC) - appears specifically when the terminal's merchant is registered under a Partner Portfolio which allows PayFAC
Sub Merchant Name Name of the submerchant using the terminal of a Pay Facilitator (PayFAC) - appears specifically when the terminal's merchant is registered under a Partner Portfolio which allows PayFAC


Features

Filter:

FIELD DESCRIPTION
Allow Secure Tokens Storage Allows Secure Tokens registering for recurring payments and other sub settings
Validate SC Security Once enabled, requires the CVV validation for each Secure Tokens registration
Allow Dashboard Allows users in Selfcare system to visualise payments' statistics
Allow Bulk Payments Allows to process multiple transactions at once using a bulk file
Allow Offline sale Allows the processing of offline transactions by the Virtual Terminal and using the XML Integration Method
VT Auto Order ID Defines that the system shall created the Order ID for each transaction automatically
Enable Decryptx Ask for further information to see if this feature is available for you
Allow Partial Captures Allows the terminal to partially capture pre-authorizations
Allow Account Updater Background Notifications Allows the use of performing of background notifications when the account updater feature is triggered for Secure Tokens of the terminal
Account Updater Background Notification URL URL to be used as for notifications to be send to the merchant by the account updater feature
Amex OptBlue Enables the possibility of using the Amex OptBlue rate options for transactions
Allow Dynamic Descriptor Allows the use of Dynamic Descriptors on transactions - for a better understanding, take a look at Dynamic Descriptors - Using in XML Integration Method and Dynamic Descriptors - Terminal Setup by Merchant sections.
Allow PayFAC Allows the use of PayFAC feature for processing terminal. The field is displayed only for TSYSSaratoga Acquirer when the merchant's Partner Portfolio has enabled 'PayFAC' feature
Allow Enhanced Data (Level II and Level III) Allows the use of enhanced data (level 2 and level 3) for transaction processing in different channels - also depends on Acquirer support. Requires the identification of the “Data Level”, the “Shipping Address Mode” to be used with address Fields and if the Terminal should use “Template Autofill” to add enhanced data information based on an enhanced data default template.
Enable Google Pay Once enabled, the Merchant ID needs to be informed. This is going to be used together with the configuration of a Certificate on your Selfcare system to enable payments using the google pay service.
Enable Apple Pay Once enabled, the Store Name needs to be informed. This is going to be used together with the configuration of a Certificate on your Selfcare system to enable payments using the apple pay service.



Secure Tokens

When Allow Secure Tokens Storage is selected, the following options are made available.

Filter:

FIELD DESCRIPTION
Validate Secure Tokens Requires the validation of the card account in each Token registration
CVV mandatory Defines that the CVV is mandatory at each registration of a Token
Allow HPP Secure Tokens Storage Enables the registration of Token for HPP
Store HPP Secure Tokens automatically Configures the automatic registration of a Token when performing payments using the Hosted Page integration method
Token Hosted Page email field setup Defines the behavior of the e-mail field during the Token registration using the Hosted Page integration method: Hidden, Optional or Mandatory
Allow Subscriptions Enables the use of subscriptions
Enable VAU Enables Visa Account Updater (VAU) for the terminal
Card Updater Type When VAU is enable, it's necessary to inform the updater service to be used
VAU Merchant ID When VAU is enable, it's necessary to inform the merchant's id to use the VAU service
Enable ABU Enables Mastercard Automatic Billing Updater (ABU) for the terminal
Card Updater Type When ABU is enable, it's necessary to inform the updater service to be used
ABU Merchant ID When ABU is enable, it's necessary to inform the merchant's id to use the ABU service


Subscriptions

When Allow Subscriptions is selected, the following options are made avialable.

Filter:

FIELD DESCRIPTION
Subscription max wait for payments, days Subscription is marked as suspended if payment was not received after the specified days number
Subscriptions max missed periods Subscription is marked as suspended if paid periods count is less for a set value than expected
Subscriptions payment notification, days Number of days after which first warning notification about not paid subscription will be sent
Subscription missed periods notification Warning notification will be sent if actual paid periods is less for an specified number than expected paid periods
Subscription repeat notification, days Number of days passing which repeat notification is sent
Subscription Auth max attempts Subscription is marked as suspended if payment was not successful after specified attempts number



The subscriptions' fields already appear defined with default values, which can be modified, but we recommend you to consult with our Support Team before any changes.


Terminal Limits

This feature allows to configure for a Merchant the use of specific rules to limit transactions.


As you can see in the previous image, the limits can be defined for two limit configurations:

  • Terminal Volume Limits: Limit applied to the whole set of transactions processed by the Terminal.
  • Card-Level Volume Limits: Limit applied to the subset of transactions processed by the Terminal, for a specific card brand.


The Terminal Level configuration for transaction limits allows more flexibility when defining those limits than the Merchant Level.


The Terminal Limits feature working in consonance with the same configuration, present at the Merchant Details section of the Merchant configuration.

The limits work the same way, for both terminal and card configurations, but a few elements need to be informed to register a limit, depending on the scope used.

The scope (DAILY, MONTHLY, SINGLE TRANSACTION) defines how the limit is going to be applied to the transactions, like:

  • 1 - If selected DAILY: The limit verification will consider the total volume amount of transactions performed within the day, to the given configuration. In this scope you need to inform:
  • Threshold Limit Value: Applied to every scope, this field defines the limit itself.
  • Limit Scope: DAILY
  • Current Value Amount: Applied only for DAILY and MONTHLY scopes, it's the current accumulated value for limit comparison - the calculation of the limit, in each transaction, adds to this value to keep the track of the limit.
  • Daily limits accumulate the terminal's total authorized amount (Current Value Amount) within the current day, and the value is reset when the day changes. A monthly limit is considered reached when the volume hits 98% (not configurable) of its threshold.
  • 2 - If selected MONTHLY: The limit verification will consider the total volume amount of transactions performed within the month, to the given configuration.
  • Threshold Limit Value: Applied to every scope, this field defines the limit itself
  • Limit Scope: MONTHLY
  • Current Value Amount: Applied only for DAILY and MONTHLY scopes, it's the current accumulated value for limit comparison - the calculation of the limit, in each transaction, adds to this value to keep the track of the limit
  • Monthly limits accumulate the terminal's total authorized amount (Current Value Amount) within the current month, and the value is reset when the month changes. A monthly limit is considered reached when the volume hits 98% (not configurable) of its threshold.
  • 3 - If selected SINGLE TRANSACTION: The limit verification will consider the amount of each transaction performed, to the given configuration.
  • Threshold Limit Value: Applied to every scope, this field defines the limit itself
  • Limit Scope: SINGLE TRANSACTION
  • Without CVV: Applied only to SINGLE TRANSACTION scope, this field establishes that the limit is only applied to transactions without CVV
  • Without AVS: Applied only to SINGLE TRANSACTION scope, this field establishes that the limit is only applied to transactions without AVS


LIMIT HIERARCHY APPLICATION

The limits have a particular hierarchy to be considered.

  • When Defining Volume (DAILY/ MONTHLY) Scope Limits : The Payment gateway always considers the thresholds of the volumes for the three possible elements, from the lower to the higher one in the hierarchy - CARD TYPE (if defined » TERMINAL (if defined) » MERCHANT (if defined). If any of them is reached, the constraint is applied.
  • When Defining Single (SINGLE TRANSACTION) Scope Limits : The Payment Gateway only considers the most specific threshold for the three possible elements, following the order - CARD TYPE » TERMINAL » MERCHANT.

Security & Fraud

Filter:

FIELD DESCRIPTION
Show CVV CVV will be required when processing a transaction .
Auto Decline CVV Allows to choose which CVV responses should be considered to decline a transaction.
CVV Decline Codes Once Auto Decline CVV is selected, the list of possible responses will be shown in this field. The options selected here will be used to automatically decline any transactions which result in them when the CVV verification is performed.
Enable AVS If this option is checked, the AVS is enabled and two more options will be shown: AVS Compulsory (check field) and If AVS sent (list of options). This setting, when enabled, will show three address fields at the Virtual Terminal and at the Hosted Payment Page – Street, City and Postcode – so the cardholder can provide a card billing address, but that is not mandatory.
AVS Compulsory When selected, this option enables a new field API AVS Type, and ensures that before finishing a transaction cannot be processed without filling in the address fields.
API AVS Type This field defines a configuration for the execution of AVS in API integrations – REST, XML and HPP. Depending on the value selected, the AVS will consider a specific set of fields to be sent to the bank for validation.
- Exact: The fields shown and expected are all three.
- Postal: The only field shown and expected is Postcode.
If AVS sent This field defines a configuration for the Hosted Payment Page (HPP). When an application integrated to a HPP already has the cardholder’s billing address, it’s possible to send this data to the HPP and selecting one of the options in this field you can:
- Hide – selecting “Hide”, the HPP is going to use the address internally on the AVS, but the data is not going to be shown on the HPP.
- Display – selecting “Display”, the address receive by the HPP will be shown and used to execute the AVS, but It’ll not be editable by the user.
- Editable – selecting “Editable”, the address receive by the HPP will be shown and used to execute the AVS, but the user will be able to edit the fields before submiting the payment.
AVS Code Approval Allows to choose which AVS response codes should be considered to approve a transaction.
Approving AVS Codes This list presentes the possible AVS response codes (and description). Depending on the values selected, the terminal is going to consider a transaction approved, if its AVS response code matches any option selected.
Refund Amount Limit By default it is set to 100%
Allow Unreferenced Refunds Refund transaction with more than 100%
Limit Unreferenced limit
Allow 3DS Allow 3D Secure into account
FAC MID If 3D Secure is enabled, enter MID provided by FAC
FAC Password If 3D Secure is enabled, enter Password provided by FAC
Allow Voice ID Legacy feature - no longer available
Auth ID Legacy feature - no longer available
Auth Password Legacy feature - no longer available
Use Max Mind Contact Support Team to check if this option is available for you
Use Sentinel Defend Contact Support Team to check if this option is available for you



Integration

Filter:

FIELD DESCRIPTION
Use Unique Ref By default it will create Unique Ref for each transaction. When enabled you will receive the unique ref back in the response for XML
Payment Page Version Templates for Payment Page
Auto Ready If enabled, all transactions will go to “ready” status and if disabled all transactions will go to “pending” status and will require manual approval
Auto Ready Limit If the limit is set, all transactions above the limit will be set as “pending” and will require a manual approval
Enable Validation Enable background validation
Validation URL If background validation is enabled, enter URL
Receipt Page URL URL for receipt page
MPI Receipt URL URL for MPI receipt page
ISV Integration Field to associate the terminal to a specific ISV Integration registered, as a tracking alternative for transactions in ISV partnerships
Secure Tokens URL URL for Secure Tokens
Secure ACH Account URL Contact Support Team to check if this feature is available for you
Include Bank response code in XML Defines if the gateway should include the original bank response in responses provided by the XML Integration method
Include Masked Card Number in XML Response Defines if the gateway should provided the transaction's card (masked) in responses provided by the XML Integration method



Receipt & Notification

Filter:

FIELD DESCRIPTION
Notification Email If this option is selected, a notification email will be sent for all transactions
Notification Language The terminal uses the language defined here as default for receipts' printing and notifications.
Cardholder Receipt If this option is selected, a receipt will be sent to cardholders.
Receipt Response Codes Select receipts for all transactions: approval, decline, referral and others.
Show Email on VT If this option is selected, email address will be require to process transactions on Virtual Terminal.
Merchant Support Mailbox Partners must enter their support Email address here.



ACH Processing

Contact Support Team to check if this option is available for you and to understand how to configure it.


Cards

In this section you have to select all the card brands which will be accepted by the terminal to process transactions.


UnionPay Processing

Contact Support Team to check if this option is available for you and to understand how to configure it.


Email or SMS Alerts

Filter:

FIELD DESCRIPTION
Daily Net Sales If this option is selected, a notification email or SMS will be sent according to selected criteria for daily sales
Sales Approval If this option is selected, a notification email or SMS will be sent according to selected criteria for approval transactions
Sale Declined If this option is selected, a notification email or SMS will be sent according to selected criteria for declined transactions
Sale Pended If this option is selected, a notification email or SMS will be sent according to selected criteria for pended transactions
Sale Voided If this option is selected, a notification email or SMS will be sent according to selected criteria for voided transactions
Sale Refunded If this option is selected, a notification email or SMS will be sent according to selected criteria for refunded transactions


SMS Alert Setup


E-mail Alert Setup


Terminal Devices

Contact Support Team to check if this option is available for you and to understand how to configure it.


Decryptx Settings

Contact Support Team to check if this option is available for you and to understand how to configure it.

Copyright © 2024 | Powered by DokuWiki